Dixon 71NAB44VS, Air Brake Male Run Tee, 7/16"-24 x 1/4", 1/4" Tube, 150 PSI, Brass
Item # 71NAB44VS
Ships in 3-5 Business Days
SUBJECT TO MANUFACTURER AVAILABILITY
Item # 71NAB44VS
SUBJECT TO MANUFACTURER AVAILABILITY
Weight | 0.090000 |
---|---|
Brand | DIXON VALVE & COUPLING COMPANY, LLC |
Product Type | Simple product |
MPN | 71NAB44VS |
Product | Tees |
Material | Brass |
PSI | 150 PSI |
Thread Size | 7/16"-24 x 1/4" |
Thread | Straight x Pipe |
Tube Size | 1/4" |
Flow | .13" |
Min. Temp (°F) | -40 |
Max Temp (°F) | 200 |
Construction | Machined from CA260, CA345 or CA377 brass; pre-applied thread sealant; thread sealant may be white or burnt orange |
Application | Designed for use in air brake systems or cab controls. Utilize ribbed sleeve for compression and positive grip. Compatible tubing: SAE J844 type A and B. |
Features | Positive Grip |
Specifications | Meets D.O.T FMVSS 571.106 and SAE J246; ref. SAE 100424 BA |
Installation | Cut tubing squarely- maximum of 15° angle allowable. Check that port or mating part is clean and free of debris. Insert tubing into fittings until it bottoms on seat. Tighten nut with wrench until one thread remains visible on the fittings body; (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench-tightened according to the tube size used. |
WARNING! | This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov |