Dixon RBU9, Boss™ Clamp, 2 Bolt Type, 2 Gripping Fingers, 3/4" Hose ID, 1-10/64"-1-20/64" Hose OD, Stainless Steel

Item # RBU9

Ships in 3-5 Business Days

SUBJECT TO MANUFACTURER AVAILABILITY

Subtotal:

Details

Details

RBU9 | Boss Clamp 2 Bolt Type, 2 Gripping Fingers, Stainless Steel, 3/4" Hose Inside Diameter (I.D.), 1-20/64" Hose ID To, 1-10/64" Hose OD From, 21 ft. Lbs. Torque, Boss Series.
More Information
Weight 0.610000
Brand DIXON VALVE & COUPLING COMPANY, LLC
Product Type Simple product
MPN RBU9
Product Boss™ Clamps
Series Boss™
Material Stainless Steel
Hose ID To 1-20/64"
Hose OD From 1-10/64"
Application The correct size Boss Clamp must be used. Bolts in Boss Clamps are designed to bend as they are tightened. This allows the clamp to conform to the hose outside diameter; Always tighten bolts to their specified torque value; Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses. Boss Clamps are for single use only! Once removed they are to be discarded.
Features 2-bolt type clamp with 2 gripping fingers and 2 clamp sections
Specifications Recommended for steam service up to 450°F (232°C).
Data 21 ft. lbs. (torque)
Instructions
  • 2 Bolt Boss Clamp Bolt Tightening Sequence, Using a torque wrench, begin tightening the bolts as follows:
  • 1. First bolt (nut facing assembler) 1 full turn
  • 2. Second bolt (opposite first bolt) 1 full turn
  • 3. Repeat procedure "a" and "b" until both bolts have reached the recommended torque
  • 4. Remove assembly from vise
Safety Notes The bolts used in the Boss interlocking clamps are not standard bolts. They vary from standard bolts in their length, diameter, overall thread length and material hardness. These bolts can be retorqued, but it is not recommended that the bolts or clamps be reused, as they are designed for a single bend only. Dixon Recommends using only factory supplied replacement bolts. Replacement nuts and bolts are available, Contact Anderson Process for more information.Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely effect clamp performance. Do not lubricate nuts and bolts. Recommended torque rating in ft. lbs. Worn-out hose couplings can be dangerous. They should be checked regularly and replace when necessary. Each coupling user should review applications and add safety devices where indicated. Pressurized steam is an extremely dangerous commodity. Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! Never use an unapproved item for steam service. Always follow the manufacturer's product recommendations for pressurized steam handling.
WARNING! This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov

Related Documents

Reviews

Reviews

Write Your Own Review
You're reviewing:Dixon RBU9, Boss™ Clamp, 2 Bolt Type, 2 Gripping Fingers, 3/4" Hose ID, 1-10/64"-1-20/64" Hose OD, Stainless Steel