Item # RC075EZ-70
SUBJECT TO MANUFACTURER AVAILABILITY
| Weight | 1.200000 |
|---|---|
| Brand | DIXON VALVE & COUPLING COMPANY, LLC |
| Product Type | Simple product |
| MPN | RC075EZ-70 |
| Series | EZ Boss-Lock™ |
| Product | Type C Coupler |
| Size | 3/4" |
| Material | 316 Stainless Steel |
| Hose ID To | 1-22/64" |
| Hose OD From | 1-6/64" |
| PSI | 250 PSI |
| Seal | Buna-N |
| Application | Developed specifically for chemical transport hoses having Cross-linked Polyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes. |
| Specifications | Produced to interchange with all product produced to Commercial Item Description A-A-59326D. |
| Features | Provides a permanently attached cam and groove fitting when superior coupling retention is required. In testing tank transport hoses from a wide variety of manufacturers, the swaged Boss-Lock fitting proved itself to be the clear winner in overall performance. |
| How it works | To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. No more fumbling with clamps, wire, clips or pins, just close the handles and the locking mechanism is engaged. Extremely easy to open, the releaser lever is under your thumb when you want to open the fitting, ergonomic. |
| Note | Special equipment is required for installation, Consult Anderson Process for pricing and availability. |
| Options | Fittings are also available special order for other sizes or hose OD's. Consult Anderson Process for pricing and availability. |
| Safety Notes | Under no circumstances should cam and groove couplings be used for compressed air or steam service! Dixon stems and ferrules are specifically designed to be used together as a coupling system. Due to differences in dimensions and tolerances for safety reasons, do not use other manufacturer's stems or ferrules with Dixon products; Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F / 21°C with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Anderson Process. Contact Anderson Process for swage or crimp recommendations; You must purchase a fitting and the matching ferrule to create an assembly. |
| WARNING! | This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. For more information go to www.P65Warnings.ca.gov |
