Graco's 24Y610 SaniForce 1040e Electric Diaphragm Pump is up to 5 times more efficient than your average air-operated diaphragm pump. This particular model is best used for sanitary fluid transfer applications where it would require low pulsations and can stall under pressure. The 24Y610 design also eliminates leaking and failures due to run-dry pump conditions completely. Other notable features include 1" (DIN) connections, stainless steel center section (Stainless steel, aluminum, coated carbon steel, bronze non-wetted parts), BLDC motor, 2.2 HP, SST seats, EPDM O-Rings, Weighted Neoprene balls, Santoprene diaphragms and temperature range of 32°F to 104°F.
MPN 24Y610 Brand Graco UOM EA Series SaniForce 1040e Size 1" Connection Type DIN Material Stainless Steel Construction Stainless Steel Center Section (Stainless steel, aluminum, coated carbon steel, bronze) Seat/O-Rings SST/EPDM Balls Weighted Neoprene Diaphragms Santoprene Working PSI 70 PSI Flow Max Free-Flow Delivery: 35 gpm (132.5 lpm) / Max Pump Speed: 280 cpm Motor Type BLDC Horsepower 2.2 HP Speed (RPM) 3600 Voltage 320 VDC Min. Temp (°F) 32 Max Temp (°F) 104 Features 3/8" NPTF (Air Inlet Size) Specifications Gear Ratio: 11.86 / Fluid Displacement per Cycle: 0.10 g (0.38 l) Interchange Data Sound Pressure: At 70 psi fluid pressure and cpm: 71 dBa (measured per ISO-9614-2); At 30 psi fluid pressure and 280 cpm: 94 dBa(measured per ISO-9614-2); At 70 psi fluid pressure and 50 cpm: 61 dBa (tested 3.28 ft from equipment); At 30 psi fluid pressure and 280 cpm: 84 dBa (tested 3.28 ft from equipment) Options Fluid Inlet and Outlet Size - 1-1/2" Sanitary Flange or 40 mm DIN 11851 Application Sanitary Fluid Transfer NOTE No Compressor
- Related documents