Item # SP-700DD-1851P-39
SUBJECT TO MANUFACTURER AVAILABILITY
| Weight | 23.000000 |
|---|---|
| Brand | Standard Pump |
| Product Type | Simple product |
| MPN | SP-700DD-1851P-39 |
| Series | 1851 Series / SP-700DD Series |
| Connection | Hose Barb |
| Immersion Length | 39" |
| PSI | 87 PSI |
| Max Flow | 12.00 GPM |
| Viscosity | 10,000 cps |
| Discharge | 1-1/2" |
| Wetted Materials | 316SSL, SiC/Viton & PTFE or Buna (varies by model) |
| Max Temp (°F) | 300 |
| Application | Polymers - Oil & Greases - Resins - Paints - Adhesives - Varnishes |
| Features | Continuous Duty Cycle, 1/4" Max Particulate Size, 32 Ra Surface Finish, 316 Stainless Steel Tube Assembly, PTFE Stator |
| Specifications | Direct Drive |
| Note | Motor Drive: 230/460V. 3-Phase, Electric, Pneumatic |
| WARNING! | Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables. |
